REALA 500D Colour Negative Film

Exposure Index

This number is appropriate for use with exposure meters marked for ISO / ASA speeds. It should be noted, however, that the recommended exposure index may not apply exactly due to differences in processing, the usage of exposure meters or other conditions. For the best results it is recommended that test exposures be made prior to use, referring to instructions for the exposure meter used.

Colour Balance

This film is colour-balanced for exposure to daylight. No light balancing or conversion filters are required with this light source. Where the light source varies significantly from this colour temperature, as in tungsten light filming, the following filters and exposure indexes are recommended.

The above filter recommendations should provide approximate colour conversion. Final colour correction should be made when making prints.

Reciprocity Characteristics

Fujicolor negative film F-500D does not need lens opening adjustment nor filtration to avoid a shift of colour balance when used with shutter speeds of 1/1000 to 1/10 second. When the exposure time is 1 second, use 1/3 stop larger lens opening.

Edge Markings

MR code system [key number, film identification mark (FN92) and machine-readable bar code for each; film name FUJI F-500D, emulsion number, roll number, frame marks (5, 8, 15 perforations apart for 65mm film, 4 perforations apart for 35mm film, no frame marks for 16mm film) etc.] is printed as latent images.

Foot Candle Table

* With Fuji LBB-12 Filter or Wratten No 80A